本文共 10855 字,大约阅读时间需要 36 分钟。
*索引节点对象由inode结构体表示,定义文件在linux/fs.h中 */ struct inode { struct hlist_node i_hash; /* 哈希表 */ struct list_head i_list; /* 索引节点链表 */ struct list_head i_dentry; /* 目录项链表 */ unsigned long i_ino; /* 节点号 */ atomic_t i_count; /* 引用记数 */ umode_t i_mode; /* 访问权限控制 */ unsigned int i_nlink; /* 硬链接数 */ uid_t i_uid; /* 使用者id */ gid_t i_gid; /* 使用者id组 */ kdev_t i_rdev; /* 实设备标识符 */ loff_t i_size; /* 以字节为单位的文件大小 */ struct timespec i_atime; /* 最后访问时间 */ struct timespec i_mtime; /* 最后修改(modify)时间 */ struct timespec i_ctime; /* 最后改变(change)时间 */ unsigned int i_blkbits; /* 以位为单位的块大小 */ unsigned long i_blksize; /* 以字节为单位的块大小 */ unsigned long i_version; /* 版本号 */ unsigned long i_blocks; /* 文件的块数 */ unsigned short i_bytes; /* 使用的字节数 */ spinlock_t i_lock; /* 自旋锁 */ struct rw_semaphore i_alloc_sem; /* 索引节点信号量 */ struct inode_operations *i_op; /* 索引节点操作表 */ struct file_operations *i_fop; /* 默认的索引节点操作 */ struct super_block *i_sb; /* 相关的超级块 */ struct file_lock *i_flock; /* 文件锁链表 */ struct address_space *i_mapping; /* 相关的地址映射 */ struct address_space i_data; /* 设备地址映射 */ struct dquot *i_dquot[MAXQUOTAS]; /* 节点的磁盘限额 */ struct list_head i_devices; /* 块设备链表 */ struct pipe_inode_info *i_pipe; /* 管道信息 */ struct block_device *i_bdev; /* 块设备驱动 */ unsigned long i_dnotify_mask; /* 目录通知掩码 */ struct dnotify_struct *i_dnotify; /* 目录通知 */ unsigned long i_state; /* 状态标志 */ unsigned long dirtied_when; /* 首次修改时间 */ unsigned int i_flags; /* 文件系统标志 */ unsigned char i_sock; /* 可能是个套接字吧 */ atomic_t i_writecount; /* 写者记数 */ void *i_security; /* 安全模块 */ __u32 i_generation; /* 索引节点版本号 */ union { void *generic_ip; /* 文件特殊信息 */ } u; }; /* *索引节点的操作inode_operations定义在linux/fs.h中 */ struct inode_operations { int (*create) (struct inode *, struct dentry *,int); /*VFS通过系统调用create()和open()来调用该函数,从而为dentry对象创建一个新的索引节点。在创建时使用mode制定初始模式*/ struct dentry * (*lookup) (struct inode *, struct dentry *); /*该韩式在特定目录中寻找索引节点,该索引节点要对应于dentry中给出的文件名*/ int (*link) (struct dentry *, struct inode *, struct dentry *); /*该函数被系统调用link()电泳,用来创建硬连接。硬链接名称由dentry参数指定,连接对象是dir目录中ld_dentry目录想所代表的文件*/ int (*unlink) (struct inode *, struct dentry *); /*该函数被系统调用unlink()调用,从目录dir中删除由目录项dentry制动的索引节点对象*/ int (*symlink) (struct inode *, struct dentry *, const char *); /*该函数被系统电泳symlik()调用,创建符号连接,该符号连接名称由symname指定,连接对象是dir目录中的dentry目录项*/ int (*mkdir) (struct inode *, struct dentry *, int); /*该函数被mkdir()调用,创建一个新鲁姆。创建时使用mode制定的初始模式*/ int (*rmdir) (struct inode *, struct dentry *); /*该函数被系统调用rmdir()调用,删除dir目录中的dentry目录项代表的文件*/ int (*mknod) (struct inode *, struct dentry *, int, dev_t); /*该函数被系统调用mknod()调用,创建特殊文件(设备文件、命名管道或套接字)。要创建的文件放在dir目录中,其目录项问dentry,关联的设备为rdev,初始权限由mode指定*/ int (*rename) (struct inode *, struct dentry *, struct inode *, struct dentry *); /*VFS调用该函数来移动文件。文件源路径在old_dir目录中,源文件由old_dentry目录项所指定,目标路径在new_dir目录中,目标文件由new_dentry指定*/ int (*readlink) (struct dentry *, char *, int); /*该函数被系统调用readlink()调用,拷贝数据到特定的缓冲buffer中。拷贝的数据来自dentry指定的符号链接,最大拷贝大小可达到buflen字节*/ int (*follow_link) (struct dentry *, struct nameidata *); /*该函数由VFS调用,从一个符号连接查找他指向的索引节点,由dentry指向的连接被解析*/ int (*put_link) (struct dentry *, struct nameidata *); /*在follow_link()调用之后,该函数由vfs调用进行清楚工作*/ void (*truncate) (struct inode *); /*该函数由VFS调用,修改文件的大小,在调用之前,索引节点的i_size项必须被设置成预期的大小*/ int (*permission) (struct inode *, int); /*该函数用来检查给低昂的inode所代表的文件是否允许特定的访问模式,如果允许特定的访问模式,返回0,否则返回负值的错误码。多数文件系统都将此区域设置为null,使用VFS提供的通用方法进行检查,这种检查操作仅仅比较索引及诶但对象中的访问模式位是否和mask一致,比较复杂的系统,比如支持访问控制链(ACL)的文件系统,需要使用特殊的permission()方法*/ int (*setattr) (struct dentry *, struct iattr *); /*该函数被notify_change调用,在修改索引节点之后,通知发生了改变事件*/ int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *); /*在通知索引节点需要从磁盘中更新时,VFS会调用该函数*/ int (*setxattr) (struct dentry *, const char *, const void *, size_t, int); /*该函数由VFS调用,向dentry指定的文件设置扩展属性,属性名为name,值为value*/ ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); /*该函数被VFS调用,向value中拷贝给定文件的扩展属性name对应的数值*/ ssize_t (*listxattr) (struct dentry *, char *, size_t); /*该函数将特定文件所有属性别表拷贝到一个缓冲列表中*/ int (*removexattr) (struct dentry *, const char *); /*该函数从给定文件中删除指定的属性*/}; 本文来自ChinaUnix博客,如果查看原文请点:
1、struct inode──字符设备驱动相关的重要结构介绍
内核中用inode结构表示具体的文件,而用file结构表示打开的文件描述符。Linux2.6.27内核中,inode结构体具体定义如下: struct inode {
struct hlist_node i_hash; struct list_head i_list; struct list_head i_sb_list; struct list_head i_dentry; unsigned long i_ino; atomic_t i_count; unsigned int i_nlink; uid_t i_uid; gid_t i_gid; dev_t i_rdev; //该成员表示设备文件的inode结构,它包含了真正的设备编号。 u64 i_version; loff_t i_size; #ifdef __NEED_I_SIZE_ORDERED seqcount_t i_size_seqcount; #endif struct timespec i_atime; struct timespec i_mtime; struct timespec i_ctime; unsigned int i_blkbits; blkcnt_t i_blocks; unsigned short i_bytes; umode_t i_mode; spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ struct mutex i_mutex; struct rw_semaphore i_alloc_sem; const struct inode_operations *i_op; const struct file_operations *i_fop; /* former ->i_op->default_file_ops */ struct super_block *i_sb; struct file_lock *i_flock; struct address_space *i_mapping; struct address_space i_data; #ifdef CONFIG_QUOTA struct dquot *i_dquot[MAXQUOTAS]; #endif struct list_head i_devices; union { struct pipe_inode_info *i_pipe; struct block_device *i_bdev; struct cdev *i_cdev; //该成员表示字符设备的内核的 内部结构。当inode指向一个字符设备文件时,该成员包含了指向struct cdev结构的指针,其中cdev结构是字符设备结构体。 }; int i_cindex; __u32 i_generation; #ifdef CONFIG_DNOTIFY unsigned long i_dnotify_mask; /* Directory notify events */ struct dnotify_struct *i_dnotify; /* for directory notifications */ #endif #ifdef CONFIG_INOTIFY struct list_head inotify_watches; /* watches on this inode */ struct mutex inotify_mutex; /* protects the watches list */ #endif unsigned long i_state; unsigned long dirtied_when; /* jiffies of first dirtying */ unsigned int i_flags; atomic_t i_writecount; #ifdef CONFIG_SECURITY void *i_security; #endif void *i_private; /* fs or device private pointer */ };2、struct file ──字符设备驱动相关重要结构
文件结构 代表一个打开的文件描述符,它不是专门给驱动程序使用的,系统中每一个打开的文件在内核中都有一个关联的struct file。它由内核在open时创建,并传递给在文件上操作的任何函数,知道最后关闭。当文件的所有实例都关闭之后,内核释放这个数据结构。 struct file {
/* * fu_list becomes invalid after file_free is called and queued via * fu_rcuhead for RCU freeing */ union { struct list_head fu_list; struct rcu_head fu_rcuhead; } f_u; struct path f_path; #define f_dentry f_path.dentry //该成员是对应的 目录结构 。 #define f_vfsmnt f_path.mnt const struct file_operations *f_op; //该操作 是定义文件关联的操作的。内核在执行open时对这个 指针赋值。 atomic_long_t f_count; unsigned int f_flags; //该成员是文件标志。 mode_t f_mode; loff_t f_pos; struct fown_struct f_owner; unsigned int f_uid, f_gid; struct file_ra_state f_ra; u64 f_version; #ifdef CONFIG_SECURITY void *f_security; #endif /* needed for tty driver, and maybe others */ void *private_data;//该成员是系统调用时保存状态信息非常有用的资源。 #ifdef CONFIG_EPOLL /* Used by fs/eventpoll.c to link all the hooks to this file */ struct list_head f_ep_links; spinlock_t f_ep_lock; #endif /* #ifdef CONFIG_EPOLL */ struct address_space *f_mapping; #ifdef CONFIG_DEBUG_WRITECOUNT unsigned long f_mnt_write_state; #endif };----------------------------------------------------------------------------
(1)struct file结构体定义在include/linux/fs.h中定义。文件结构体代表一个打开的文件,系统中的每个打开的文件在内核空间都有一个关联的 struct file。它由内核在打开文件时创建,并传递给在文件上进行操作的任何函数。在文件的所有实例都关闭后,内核释放这个数据结构。在内核创建和驱动源码中,struct file的指针通常被命名为file或filp。如下所示:
struct file { union { struct list_head fu_list; 文件对象链表指针linux/include/linux/list.h struct rcu_head fu_rcuhead; RCU(Read-Copy Update)是Linux 2.6内核中新的锁机制 } f_u; struct path f_path; 包含dentry和mnt两个成员,用于确定文件路径 #define f_dentry f_path.dentry f_path的成员之一,当前文件的dentry结构 #define f_vfsmnt f_path.mnt 表示当前文件所在文件系统的挂载根目录 const struct file_operations *f_op; 与该文件相关联的操作函数 atomic_t f_count; 文件的引用计数(有多少进程打开该文件) unsigned int f_flags; 对应于open时指定的flag mode_t f_mode; 读写模式:open的mod_t mode参数 off_t f_pos; 该文件在当前进程中的文件偏移量 struct fown_struct f_owner; 该结构的作用是通过信号进行I/O时间通知的数据。 unsigned int f_uid, f_gid; 文件所有者id,所有者组id struct file_ra_state f_ra; 在linux/include/linux/fs.h中定义,文件预读相关 unsigned long f_version; #ifdef CONFIG_SECURITY void *f_security; #endif /* needed for tty driver, and maybe others */ void *private_data; #ifdef CONFIG_EPOLL /* Used by fs/eventpoll.c to link all the hooks to this file */ struct list_head f_ep_links; spinlock_t f_ep_lock; #endif /* #ifdef CONFIG_EPOLL */ struct address_space *f_mapping; }; (2)struct dentry dentry 的中文名称是目录项,是Linux文件系统中某个索引节点(inode)的链接。这个索引节点可以是文件,也可以是目录。inode(可理解为ext2 inode)对应于物理磁盘上的具体对象,dentry是一个内存实体,其中的d_inode成员指向对应的inode。也就是说,一个inode可以在运行的时候链接多个dentry,而d_count记录了这个链接的数量。 struct dentry { atomic_t d_count; 目录项对象使用计数器,可以有未使用态,使用态和负状态 unsigned int d_flags; 目录项标志 struct inode * d_inode; 与文件名关联的索引节点 struct dentry * d_parent; 父目录的目录项对象 struct list_head d_hash; 散列表表项的指针 struct list_head d_lru; 未使用链表的指针 struct list_head d_child; 父目录中目录项对象的链表的指针 struct list_head d_subdirs;对目录而言,表示子目录目录项对象的链表 struct list_head d_alias; 相关索引节点(别名)的链表 int d_mounted; 对于安装点而言,表示被安装文件系统根项 struct qstr d_name; 文件名 unsigned long d_time; /* used by d_revalidate */ struct dentry_operations *d_op; 目录项方法 struct super_block * d_sb; 文件的超级块对象 vunsigned long d_vfs_flags; void * d_fsdata;与文件系统相关的数据 unsigned char d_iname [DNAME_INLINE_LEN]; 存放短文件名};
(3)索引节点对象由inode结构体表示,定义文件在linux/fs.h中。
struct inode {
struct hlist_node i_hash; 哈希表 struct list_head i_list; 索引节点链表 struct list_head i_dentry; 目录项链表 unsigned long i_ino; 节点号 atomic_t i_count; 引用记数 umode_t i_mode; 访问权限控制 unsigned int i_nlink; 硬链接数 uid_t i_uid; 使用者id gid_t i_gid; 使用者id组 kdev_t i_rdev; 实设备标识符 loff_t i_size; 以字节为单位的文件大小 struct timespec i_atime; 最后访问时间 struct timespec i_mtime; 最后修改(modify)时间 struct timespec i_ctime; 最后改变(change)时间 unsigned int i_blkbits; 以位为单位的块大小 unsigned long i_blksize; 以字节为单位的块大小 unsigned long i_version; 版本号 unsigned long i_blocks; 文件的块数 unsigned short i_bytes; 使用的字节数 spinlock_t i_lock; 自旋锁 struct rw_semaphore i_alloc_sem; 索引节点信号量 struct inode_operations *i_op; 索引节点操作表 struct file_operations *i_fop; 默认的索引节点操作 struct super_block *i_sb; 相关的超级块 struct file_lock *i_flock; 文件锁链表 struct address_space *i_mapping; 相关的地址映射 struct address_space i_data; 设备地址映射 struct dquot *i_dquot[MAXQUOTAS];节点的磁盘限额 struct list_head i_devices; 块设备链表 struct pipe_inode_info *i_pipe; 管道信息 struct block_device *i_bdev; 块设备驱动 unsigned long i_dnotify_mask;目录通知掩码 struct dnotify_struct *i_dnotify; 目录通知 unsigned long i_state; 状态标志 unsigned long dirtied_when;首次修改时间 unsigned int i_flags; 文件系统标志 unsigned char i_sock; 套接字 atomic_t i_writecount; 写者记数 void *i_security; 安全模块 __u32 i_generation; 索引节点版本号 union { void *generic_ip;文件特殊信息 } u; };inode 译成中文就是索引节点。每个存储设备或存储设备的分区(存储设备是硬盘、软盘、U盘 ... ... )被格式化为文件系统后,应该有两部份,一部份是inode,另一部份是Block,Block是用来存储数据用的。而inode呢,就是用来存储这些数据的信息,这些信息包括文件大小、属主、归属的用户组、读写权限等。inode为每个文件进行信息索引,所以就有了inode的数值。操作系统根据指令,能通过inode值最快的找到相对应的文件。
做个比喻,比如一本书,存储设备或分区就相当于这本书,Block相当于书中的每一页,inode 就相当于这本书前面的目录,一本书有很多的内容,如果想查找某部份的内容,我们可以先查目录,通过目录能最快的找到我们想要看的内容。 当我们用ls 查看某个目录或文件时,如果加上-i 参数,就可以看到inode节点了;比如ls -li lsfile.sh ,最前面的数值就是inode信息转载地址:http://nrlmb.baihongyu.com/